FORMULARY: SHOWER AND BATH GEL
This shower and bath gel will pamper your skin while you cleanse the body.
This gentle wash creates lather that will leave your skin soft and supple.
Shower and Bath Gel
Soap Blend DEV (8 fl oz)
PEG-7 Glyceryl Cocoate (8 fl oz)
DMDM Hydantoin (2 fl oz)
Citric Acid 4 oz PA002A
Polysorbate 20 (2 fl oz)
INGREDIENT |
% of total |
500 g |
2 cups |
Function |
Part A |
Distilled Water |
49.69 |
248.45 |
1 cup + 2 tsp |
Diluent |
Soap Blend DEV |
40.00 |
200.00 |
¾ cup
+ 1 ½ TBS |
Surfactant – cleansing agent |
PEG-7 Glyceryl Cocoate |
8.50 |
42.50 |
2 ¾ TBS |
Emollient; skin conditioner |
DMDM Hydantoin |
0.30 |
1.50 |
1/3 tsp |
Preservative |
Part B |
Citric Acid |
0.06 |
0.30 |
Pinch |
|
Part C |
Polysorbate 20 |
0.65 |
3.25 |
¾ tsp |
Fragrance solubilizer |
Fragrance |
0.30 |
1.50 |
1/3 tsp |
Aroma |
Part D |
Sodium Chloride (or) table salt *** |
0.50 |
2.5 |
1/3 tsp |
To thicken |
Total |
100 % |
500g |
2 cups |
|
Instructions
1. Combine ingredients of Part A with mixing until dissolved.
2. Add the ingredients of Part B to Part A with mixing.
3. Premix the ingredients of Part C and add to Part A+B with mixing.
4. Add slowly Part D for thickening of soap blend.
Add fragrances such as:
· Modern Fresh Floral
· Chamomile Spa
· Sweet Herbal
· Pina Colada
· Cranberry Crème
· Cucumber Melon
· Ocean Fresh
(Add fragrance solution slowly while mixing to desired strength.)
Color this soap with….
· D&C Red 33
· D&C Green 5
· D&C Green 8
· D&C Orange 4
· FD&C Blue 1
· FD&C Red 4
· FD&C Red 40
· FD&C Yellow 5
· FD&C Yellow 6
Note: Color should be mixed approximately 40:1 in water before combining. Mix together and then add with mixing until the product has the color strength you are looking for.
Note: If your formula becomes cloudy add polysorbate 20 one drop at a time until it clears.
*** Viscosity (or thickness) of the blend can be adjusted with the use of sodium chloride (salt) at low levels in some of the products. This can range from 0.2% to 1%. Viscosity typically follows a salt curve whereby a maximum viscosity is reached and decreases rapidly with addition of more salt. In some cases this can be reversible with the addition of water. But too much salt reduces the solubility of the surfactant so much (again the equilibrium is forced to the left) that it comes out of solution and precipitates.
Salt thickens surfactants due to the ability of the sodium ions to lower the charge density on the outside of the micelles in the formula. This usually only applies to anionic species or anionic nonionic mixtures
FORMULARY: SHAMPOO
(Print Friendly Version) |
|
- Place the following items from this formulation in your cart - Tetrasodium EDTA (2 oz), Aloe Vera, Panthenol (1 oz), Soap Blend DEV( 8 fl oz) And DMDM Hydantoin (2 fl oz) (This does not include color, fragrance, water, table salt or Polysorbate 20)
|
This shampoo contains Panthenol or Provitamin B5 to increase the strength of hair. It penetrates the inside of the hair to impart flexibility and shine. It can thicken hair up to 10%.
INGREDIENT |
% of total |
500 g |
2 cups |
Function |
Part A |
Distilled Water |
71.35 |
356.75 |
1 ½ cup |
Diluent |
Tetrasodium EDTA |
0.1 |
0.5 |
pinch |
Chelating agent; Hard water softener |
Aloe Vera |
0.25 |
1.25 |
¼ tsp |
Moisturizer |
Panthenol |
1 |
5 |
1 tsp |
Moisturizer |
Soap Blend DEV |
25 |
125 |
½ cup |
Surfactant; Cleansing agent |
DMDM Hydantoin |
0.3 |
1.5 |
1/3 tsp |
Preservative |
Part B |
Sodium Chloride
(table salt) |
2 |
10 |
2 tsp |
Thickener |
Total |
100 % |
500g |
2 cups |
|
Instructions:
- Combine ingredients of Part A with mixing until uniform
Slowly add with mixing Part B until thick.
Add fragrances such as:
Chamomile Spa
Sweet Herbal
Pina Colada
Cranberry Crème
Cucumber Melon
Note: Premix two parts “Polysorbate 20” to one part Fragrance. In other words, make up in a separate container 2 parts of "Polysorbate 20" and 1 part of fragrance, mix together and then add with mixing to the shampoo until the product has the fragrance strength you are looking for. (Add fragrance solution slowly while mixing to desired strength.)
Color this shampoo with….
D&C Red 33
D&C Green 5
D&C Green 8
D&C Orange 4
FD&C Blue 1
FD&C Red 4
FD&C Red 40
FD&C Yellow 5
FD&C Yellow 6
Note: Color should be mixed approximately 40:1 in water before combining with the shampoo. Mix together and then add with mixing to the shampoo until the product has the color strength you are looking for.
Note: If your shampoo becomes cloudy add polysorbate 20 one drop at a time until shampoo clears. |
|
